Futuri Streaming & POST - OMT/iMediaTouch Now Playing Export

This article will walk you through the Export of Now Playing data from OMT/iMediaTouch to your Futuri Transmitter. 

Before beginning, you will need to assign your Static IP address.  Click here for instructions on how to set up a static IP address for your transmitter

Step 1 - From the On-Air software, select the iMediaTouch logo, typically located in the top right corner of your screen.

Image of iMedia logo

Step 2 - Click the WorkStation button that appears below the logo.

image of WorkStation options

Step 3 - Click the "Security Level 3" (WorkStation may display on a second monitor if configured to do so) and enter the "Level 3 " password.

image of Security levels
image of password entry

Step 4 - Click the "On-Air Config" button, located below the Level 3 button on the right.

image of ON-Air Config button

Step 5 - Click the "Internet" button located at the bottom of the screen.

image of Feeds, Internet, Restore buttons

Step 6 - Complete the "XML Commercial Substitution (single packet) output" as shown in the screenshot below, with the IP address being that of the streaming transmitter.

image of XML Commercial Substitution -  single packet output screen

Step 7 - Click the red "Save" button, and the grey "Done" button.

image of Restore, Save and Done buttons

Step 8 - You can now restart the On-Air software or wait until your earliest convenience. You will not need to do this immediately, however, the Now Playing information will not start exporting until the software has been refreshed.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.