This article will walk you through the Export of Now Playing data from OMT/iMediaTouch to your Futuri Transmitter.
Before beginning, you will need to assign your Static IP address. Click here for instructions on how to set up a static IP address for your transmitter.
Step 1 - From the On-Air software, select the iMediaTouch logo, typically located in the top right corner of your screen.
 |
Step 2 - Click the WorkStation button that appears below the logo.
 |
Step 3 - Click the "Security Level 3" (WorkStation may display on a second monitor if configured to do so) and enter the "Level 3 " password.
 |  |
Step 4 - Click the "On-Air Config" button, located below the Level 3 button on the right.
 |
Step 5 - Click the "Internet" button located at the bottom of the screen.
 |
Step 6 - Complete the "XML Commercial Substitution (single packet) output" as shown in the screenshot below, with the IP address being that of the streaming transmitter.
 |
Step 7 - Click the red "Save" button, and the grey "Done" button.
 |
Step 8 - You can now restart the On-Air software or wait until your earliest convenience. You will not need to do this immediately, however, the Now Playing information will not start exporting until the software has been refreshed.