Getting Started - Audio Connections - Analog

This article will cover setting up analog audio connections on Single Stream or Multi-Stream transmitters.

Gen 4 Transmitters

Single stream (SST)
Multi-Stream (MST)
The audio is connected using the supplied DB15HD connector using the pinout below. The connector can be configured for either unbalanced or balanced inputs.The Multi-Stream or MST accepts balance audio using either XLR or 1/4" TRS. 


DB15HD Pinout

PIN
CONNECTION
1-
2-
3-
4-
5
GND/GPIO GND
6GPIO
7-
8-
9-
10Unbalanced L
11Unbalanced R
12Balanced L+
13Balanced L-
14Balanced R+
15Balanced R-
S-

Gen 3 Transmitters

Analog audio can be fed to the encoder using the supplied DB9 breakout cable. This type of cable accepts both "Balanced XLR" connections and/or "Unbalanced RCA" connections.


P
Peter is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.