In some cases, NexGen stations don't generate flat text files of their logs from GSelector. In such cases, any changes made in GSelector or NexGen are automatically communicated to the other program.
In these cases, there is not a flat text file of the day's log for Futuri's Echo program to monitor. Without this log file, certain LDR features may not function properly (because we're unable to see what's "coming up" in your system.
If this applies to your station, there is an easy workaround to ensure that your music log reaches Futuri.
Setting up the export
You'll want to navigate in GSelector to Interface > Export > Schedule and create a new Schedule format.
From there, specify the path where the logs should be saved. This will match the folder configured in Echo.
Under Style, choose Fixed Offset, check the 60+ Minutes Per Hour box, use ANSI encoding, and be sure that the Date Range is set for a full day's log.
On the right under Song > Format, set the fields as shown in the screenshot below.
You will want to do the same for your Link and/or Breaknote elements, depending on where you have saved your LDR breaknotes during your clock setup with Futuri's Partner Success team.
Running the export
For Futuri to receive your log, you'll need to push it from GSelector after scheduling each day. This should only take about 30 seconds each day.
To push the log from GSelector to Futuri after scheduling, navigate back to Interface > Export > Schedule and ensure the correct date(s) are selected. Then, click Export Schedule, and you're done!