This article is part of the Tether QuickStart Guide.
In order to connect Tether to your studio automation system, we'll need to work together to set up our Echo software and/or add some configuration items to your automation system (depending on which system you use). Futuri VIP Support will work with you during your initial setup process, so don't worry -- You're not alone in this process!
Tether integrates with several automation systems. This series of articles is generally geared toward your station's IT/engineering staff, but it's a good idea for program directors to be familiar at a higher level with this information too.
Detailed articles are available for the automation systems we work with most frequently:
- NexGen: Integration Overview/Installation | Interactive Programming | Troubleshooting
- WideOrbit: Integration Overview/Installation | Interactive Programming | Troubleshooting
- SS32: Integration Overview/Installation | Interactive Programming | Troubleshooting
- Zetta: Integration Overview/Installation | Interactive Programming | Troubleshooting
- Audiovault: Integration Overview/Installation | Interactive Programming | Troubleshooting
- OpX: Please reference corporate installation documentation
The Tether and Futuri Mobile systems are also compatible with the following automation systems:
- Maestro
- ENCO
- Skylla
- Genesys
- Master Control (limited integration)
- Mediatouch (limited integration)
- Simian (limited integration)
- Player101 (limited integration)
- PlayIt (limited integration)
If you have questions about your automation system's integration with Futuri's platforms, please contact Futuri VIP Support.
If you're looking for documentation on automation integration with the Futuri Streaming or POST platforms, click here.